Vapour Absorption Refrigeration System:-
Specification of Vapour Absorption Refrigeration System:-
This type of refrigeration is usually used for domestic purposes only as it is complex in the construction and working. This type of refrigerator was developed in 1925 by Munters and Battzervan when they were studying at Royal Institute of Technology At Stockholm for their undergraduate course. This type of refrigerator was known as three fluid refrigeration system. The elimination of aqua pump from the absorption system with the complete absence of moving parts and work input. The main purpose of removing the pump was to make the machine noiseless. It uses refrigerant as a solvent s and an inlet gas for inlet of the system. The inert gas is continued to the lower side of system only by its system. It is possible to maintain the uniform pressure throughout the system and after sometime permitting the refrigerant to evaporator at low temperature corresponding to its partial pressure. In the high pressure side system (generator and condenser), there exists only the refrigerant which is subjected to total pressure of the system so that it is condensed by using normal cooling water as air as it is done in other system.
1. Switch on the main supply.
2. Start the bulb inside the cabin.
3. Adjust current and the supply voltage.
4. Take the initial temperature reading.
5. Repeat the procedure after sometime.
6. Take readings until the steady state is reached.
7. When steady state is reached, take this reading of COP.